Tool Steel, Highspeed Steels and Mould Steels

Tool Steel, Highspeed Steels and Mould Steels

Tool-Steel,-Highspeed-Steels-and-Mould-Steels

We are stockholders suppliers the following grades of tool steels and high speed steels:

01 Tool Steel01 is an oil hardening carbon manganese tool steel, possessing excellent dimensional stability during heat treatment.Typical applications: Press Tools, Broaches, Clipping, Marking Punches, Gauges, Jigs, Deep Drawing Dies, Slitting Cutters, Taps & Screwing Tools

(data sheet & typical analysis available on request)

A2 Tool SteelA2 is an air hardening, cold work, tool steel. A 5% Chromium steel which provides high hardness after heat treatment with good
dimensional stability. A2 delivers good toughness with medium wear resistance and is relatively easy to machine. Used in many applications which require good wear resistance as well as good toughness.Typical Applications: blanking tools, punch dies, trim dies, forming dies, gauges, shear , blades, stamping dies.A2 Steel Properties click here(A2 data sheet & typical analysis available on request)
D2 Tool SteelD2 Steel is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength.Typical applications: Press Tools (inc. heavy duty), general purpose punches and dies, crushers, gauges, swaging dies, tools requiring resistance to abrasion, blanking tools, Thread rolling, Coining, General purpose

D2 Steel Properties – click here.

(D2 data sheet & typical analysis available on request)

D2 Supreme™D2 Supreme is a close equivalent to DC53 cold work die and mold steel. It has excellent machining characteristics coupled with excellent wear resistance, toughness and compressive strength. Highly recommended for use when greater toughness is required.Typical applications: Moulds, punches, swaging dies, cold forging dies, forming dies, gauges, blades, shears, general purpose

(D2 Supreme data sheet & typical analysis available on request)

D3 Tool SteelD3 Steel is a high Carbon, high chromium cold work tool steel. D3 is similar to D2 but can attain a slightly higher hardness, it displays excellent abrasion/wear resistance and has good dimensional stability and high compressive strength.Typical Applications: Use for blanking and forming dies that require maximum resistance to abrasion. D3 is also used in forming rolls, press tools and punches.

D3 steel properties, click here

(D3 data sheet & typical analysis available on request)

H13 Tool SteelH13 is an air hardening chromium die steel – can be used for a range of appplications. The higher vanadium content ensures increased resistance to heat checking and all round improvement to properties at elevated temperatures. Tools may be water cooled without risk of cracking. After normal heat treatment has been carried out it is suitable for nitriding 0.30mm (0.012″) deep.Typical applications:Hot forging and pressing dies, Extrusion dies, mandrels and punches, Hot chisels, Pressure pads, Extrusion stems and rams, Blanking and bending tools, Hot heading tools, Backer blocks.

(data sheet & typical analysis available on request).

M2 High Speed SteelM2 is a medium alloyed high speed steel which has good machinability. The composition of M2 gives a good combination of toughness and hardness. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also suitable for cold work applications in tools for punching, forming and pressing(data sheet & typical analysis available on request).
M42 High Speed SteelM42 is highly cobalt alloyed. It’s composition makes for a good combination of toughness and hardness. M42 is a steel to be used in conditions where the demand for hot hardness is greatly important. Due to it’s well balanced properties M42 has come into wide use for all cutting tools(data sheet & typical analysis available on request).
P20 Tool SteelP20 (1.2311) Pre hardened to approximately 300 B.H (65 t.s.i) P20 requires no further heat treatment therefore avoiding risk of distortion or cracking. Although pre-hardened P20 is still capable of being machined and of giving a good polished finish.Typical applications:Plastic moulds, backers, bolsters, die holders. Also suitable for other applications such as rails, shafts and wear strips

(data sheet & typical analysis available on request)

P20S (1.2312) Delivered pre-hardened this material is ready for use at approximately 280/325 H.B. Similar to P20 (1.2311) but with a higher sulpher content which provides much improved machinability. This grade is not suitable for polishing or other applications requiring a fine finish.

Typical applications: Suitable for large mould frames and bolsters

(data sheet & typical analysis available on request)

P20N (1.2738) Delivered pre hardened ready for use at 280/325 H.B. With added Nickel to ensure consistent hardness through large sections. Easy to polish and readyily machinable.

Typical applications: Used for quality for pressing and injection moulding tools. If the section exceeds 400mm P20 (1.2311) won’t provide a consistent through hardness. Suitable for hard chrome plating and for nitriding

(data sheet & typical analysis available on request)