Stainless & Aluminium | Stockists & Suppliers of Stainless Steel & Aluminium

For All Your Steel Needs

Stainless and Aluminium Services Ltd, Wolverhampton are stockists and suppliers of stainless steel and aluminium for next day local and national delivery. No minimum quantity. We can supply these grades of stainless steel in the various forms. Other steel grades are also available - please call for availability - +441902 423674

Contact us

Regional Depots

Exeter:  01392 790 266
Glasgow:  0141 370 0416
Maidstone:  01622 963 038
Manchester:  0161 641 7447
Newcastle upon tyne:  0191 563 0932
Peterborough:  01733 669 210
Reading:  0118 334 3395
Sheffield:  0114 322 0124
Swansea:  01792 209 220
Wolverhampton:  01902 423 674


Stainless Steel

We are stockholders and suppliers of stainless steel in the following types or grades: Grade Stainless Steel Grade 303 – specs and stock lists Stainless Steel Grade 304 – specs and stock lists Stainless Steel Grade 316 – specs and stock lists Stainless Steel Grade 410 – specs and stock[…]



We are stockholders, suppliers & processors of Aluminium. We supply aluminium precision plates milled on both sides (FORMODAL® 030) and aluminium extrusions, profiles/mouldings, box sections, channels and, tubes. Our Aluminium stock can usually be delivered next day locally and nationwide. We supplier to local and national companies via a reliable delivery network.[…]



We can supply a comprehensive range of brass bar in flat, square, round and hexagon, brass sheet, brass tube and brass angle and channel. We can supply grades including CZ106, CZ108, CZ112, CZ114, CZ120, CZ121, CZ126, CZ130, CZ131 & CZ132. Please do not hesitate to contact our experiences sales team[…]



We can supply a comprehensive range of copper bar in square, flat and round, also copper sheet and copper tube. C101 (soft, hard, half hard) grades available in bars and sheets, and C106 Hard, C106 Soft & C106 HH for copper tube. Copper Copper is used widely in electrical, power[…]


Tool Steel, Highspeed Steels and Mould Steels

We are stockholders suppliers the following grades of tool steels and high speed steels: 01 Tool Steel 01 is an oil hardening carbon manganese tool steel, possessing excellent dimensional stability during heat treatment.Typical applications: Press Tools, Broaches, Clipping, Marking Punches, Gauges, Jigs, Deep Drawing Dies, Slitting Cutters, Taps & Screwing[…]


Phosphor Bronze

We can supply a comprehensive range of phosphor bronze bar in flat, round and hexagon. We can supply most grades including PB102/CW450K for general purpose engineering. Please do not hesitate to contact our experiences sales team for assistance and advice. Phosphor Bronze Bronze is an alloy of copper and tin,[…]

Tool Steel

D2 1.2379

D2 Steel is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength. Typical applications: Press Tools (inc. heavy duty), general purpose punches and dies, crushers, gauges, swaging dies, tools requiring resistance to abrasion, blanking tools, Thread rolling, Coining, General purpose

O1 1.2510

O1 is an oil hardening carbon manganese tool steel, possessing excellent dimensional stability during heat treatment. Typical applications: Press Tools, Broaches, Clipping, Marking Punches, Gauges, Jigs, Deep Drawing Dies, Slitting Cutters, Taps & Screwing Tools

H13 1.2344

H13 is an air hardening chromium die steel - can be used for a range of applications. The higher vanadium content ensures increased resistance to heat checking and all round improvement to properties at elevated temperatures. Tools may be water cooled without risk of cracking. After normal heat treatment has been carried out it is suitable for nitriding 0.30mm (0.012") deep. Typical applications: Hot forging and pressing dies, Extrusion dies, mandrels and punches, Hot chisels, Pressure pads, Extrusion stems and rams, Blanking and bending tools, Hot heading tools, Backer blocks.

H11 1.2343

H11 (1.2343) is a 5% chromium hot work tool steel. Compare to H13, H11 has less vanadium giving it higher toughness, with some reduction in wear resistance and temper resistance. H11 has excellent dimensional stability during heat treatment.

P20 1.2311

P20 (1.2311) Pre hardened to approximately 300 B.H (65 t.s.i) P20 requires no further heat treatment therefore avoiding risk of distortion or cracking. Although pre-hardened P20 is still capable of being machined and of giving a good polished finish.

P20S 1.2312

P20S (1.2312) Delivered pre-hardened this material is ready for use at approximately 280/325 H.B. Similar to P20 (1.2311) but with a higher sulphur content which provides much improved machinability. This grade is not suitable for polishing or other applications requiring a fine finish. Typical applications: Suitable for large mould frames and bolsters.

P20N 1.2378

P20N (1.2738) Delivered pre hardened ready for use at 280/325 H.B. With added Nickel to ensure consistent hardness through large sections. Easy to polish and readily machinable. Typical applications: Used for quality for pressing and injection moulding tools. If the section exceeds 400mm P20 (1.2311) won't provide a consistent through hardness. Suitable for hard chrome plating and for nitriding.

1.2767 1.2767

1.2767 is a nickel alloyed steel for through hardening, with moderate machinability; very high resistance against bending and high compressive strength; very high toughness and good through hardenability, also with bigger sections. Typical applications: Used for high-performance cavity plates and inserts for the processing of plastics with high surface requirements (mirror finish); stamping, forming and bending dies for particularly high pressure and bending stresses.

A2 1.2463

A2 is an air hardening, cold work, tool steel. A 5% Chromium steel which provides high hardness after heat treatment with good dimensional stability. A2 delivers good toughness with medium wear resistance and is relatively easy to machine. Used in many applications which require good wear resistance as well as good toughness. Typical Applications: blanking tools, punch dies, trim dies, forming dies, gauges, shear, blades, stamping dies.

Stainless Steel

We supply types of stainless steel to different grades including

  • Precipitation Hardening Grades
  • Austenitic Stainless
  • Martensitic
  • Duplex
  • Super Duplex
  • High Alloyed Stainless Steel

These can be crafted into numerous different stainless steel specifications:

  • Stainless Steel Round Bar
  • Stainless Steel Flat Bar
  • Stainless Steel Plasma Cut
  • Stainless Steel Plate
  • Stainless Steel Guillotined Sheet
316S31 316 1.4401 X5CrNiCuNb16-4 S17400 A182
316S11 316L 1.4541 X1CrNiMoCuN20-18-7 S31254 A564
321S31 321 1.4845 S31803 630
310S31 310 1.4301 S32760 F51
304S11 310S 1.4539 S66286 F55
904S14 304 1.4542 S21800 F44
254SMO 304L 1.4547 Nitronic 60 A453
410S21 904L 1.4021 A370
416S21 431 1.4028 A638
420S29 440B 1.4034 A276
420S37 440C 1.4057 660B
420S45 410 1.4462 660D
431S29 416 1.4943
FV520B 420 1.4944

Carbon Steel

We supply a number of Carbon steel grades to British Standard BS970 these are all available in round bar, flat bar, plate and sheet. Key Steel bright drawn square and flat bar.

BS970 EN Grades BS970 DIN
EN8 080M40 C40
EN9 080M46 C45
EN3 080M50 C50
EN32 080A42 C60

Alloy Steels

We stock and distribute a number of different alloy steels including:

  • High Tensile Alloy Steel
  • Case Hardening Alloy Steel
  • Oil Alloy Steel Specifications
  • Gas Alloy Steel Specifications
  • Nitriding Alloy Steel

All our stock conforms to British (BS970), European (Euronorm EN10083), American (AISI) and International standards

BS970 EN Grades BS970 DIN AISI
EN19 EN19T EN19U EN19A 708M40 50CrV4 4130
EN24 EN24T EN24U 709M40 51CrV4 4140
EN26 EN26W EN26X 817M40 16MnCr5 4145
EN36  EN34  EN39 826M40 4340
EN40 EN40B EN40BT 655M13 4330V
EN41 EN41S 722M24 8620
EN47 905M39
EN31 735A51

High Speed Steel

We offer a range of high speed steel that conforms to British, European and International regulations. All our high speed steel grades listed below can be supplied in round bar, flat bar, plate and sheet. High Speed Steel Tool Bits are supplied in diameters, squares flats and also flats.

BS4659 AISI ASTM A681 Werkstoff DIN 17350
BM2 M2 1.3343 BS EN ISO 4957
BM35 M35 1.3243 S 6-5-2
BM42 M42 1.3247 S 6-5-2-5
S 2-10-1-8